TRUKD: NO COMPROMISE BED RACKS
TRUKD offers three different styles of uprights, each with different attachment brackets. TRUKD uprights are compatible with the bed covers mentioned below. Most of these covers with use bed clamp or utility rail uprights, but a few will use t-slot uprights. They are made of 10 gauge steel and are paired with t-slot stud plates making them the strongest in the industry. Check out our bed attachment guide to learn more about the different TRUKD uprights and their attachment methods.
*Cover compatibility is not guaranteed and may require modification. Please reach out if you need to confirm compatibility between your bed cover and truck.
These Tonneau covers work with our racks on most trucks! Any cover that relocates the factory utility rails on Toyota trucks may not work.
- BAK Revolver X4S-T
- Truxedo Truxport
- Bestop EZ Roll
- Gator SRX
Soft covers with an inside mount like the following fit all trucks except for Toyota Tacomas and Tundras with Utility rails that are not flush with the bedside. Some of these covers may need some extra gasket material to seal up the bed.
- Truxedo LowPro
- Access Covers
FAQs
We cannot test every single truck bed and cover combo on the market. Please contact us directly with any specific compatibility questions!
Check out our rack height guide to learn more about which height would serve you best!
Most orders are packed and shipped within 2 business days!
TRUKD bed racks are adjustable in height every 2". If you decide you need a taller rack than your uprights support, then just swap them out for taller uprights.
TRUKD bed racks are rated at 1000lbs static (parked) and 250lbs dynamic (driving). We build the strongest racks on the market, so why do some of the other guys have a higher load rating? Are load ratings are established and tested under the most extreme conditions you can put your vehicle through. The rack has been tested to most trucks' bed side failure. Our rack will handle anything you can throw at it.
The T-Slot option comes with an upright that will work with the t-slot rail found on most popular retractable bed covers. Check out the compatible list of covers to see if yours is on it. If not, reach out to confirm fitment!
There are lots of advantages to a vertical design. Our number 1 goal is to allow the full functionality of as many tonneau covers as possible. This means vertical uprights!
All racks are not built equal! There are a few things that make us stand out to the discerning buyer. TRUKD racks are taller, more versatile, and more durable. We provide more features, and use higher quality coatings, materials, and hardware. TRUKD Racks are designed by seasoned designers and engineers and are tested rigorously to meet our specifications. Learn More.
All v2 rack components are interchangable. Want a tall side and a short side? Done. Want to use a smaller accessory panel on a bigger rack? Done. Want to add multiple crossbars? Done. Want to add a third crossbar? Done. We make it possible for you to build a setup that's perfect for your needs.
GET TRUKD UNIVERSITY
Contact us
If something doesn't fit, share some pictures and we'll pay for the return shipping in addition to a full refund. We are going to work with you to make sure it's a great fit before it leaves the factory.
Our products have the best coatings on the market. Period. See some rust...tell us to get a replacement part...but we know that's not going to happen!