Bed Racks for Folding Bed Covers

TRUKD offers one of the only bed racks that work with folding covers from brands like Extang, Bak, Gator, Bestop and more.

TRUKD: NO COMPROMISE BED RACKS

TRUKD offers three different styles of uprights, each with different attachment brackets. The bed covers mentioned below will most likely require the bed clamp or utility rail bed attachment. TRUKD uprights are made of 10 gauge steel and are equipped with one of the widest mounting footprints on the market, making them the strongest in the industry. Check out our bed attachment guide to learn more about the different TRUKD uprights and their attachment methods.

*Cover compatibility is not guaranteed and may require modification. Please reach out if you need to confirm compatibility between your bed cover and truck.

Compatible Folding Bed Covers

The easiest way to determine if your folding cover will open is to measure the folds, if your fold is longer than 22.5" from the hinge point it is unlikely to be able to open under our racks. Most folding covers will require our 24.5" rack for full operation.


Sit-on-top folding tonneau covers like the following work with our racks on most trucks:

  • Extang Solidfold 2.0
  • Extang Trifecta
  • Honda Ridgeline OEM (Ridgeline Only)
  • Gator Trio

Low profile folding covers like the following may require slight modification or added gasket material for fitment but will not work on Toyota Tacomas and Tundras with utility rails that are not flush with the bedside:

  • BakFlip G2
  • Bakflip MX4
  • Rugged Ridge Hard TriFold
  • Gator FX

FAQs

We cannot test every single truck bed and cover combo on the market. Please contact us directly with any specific compatibility questions!

Check out our rack height guide to learn more about which height would serve you best!

Most orders are packed and shipped within 2 business days!

TRUKD bed racks are adjustable in height every 2". If you decide you need a taller rack than your uprights support, then just swap them out for taller uprights.

TRUKD bed racks are rated at 1000lbs static (parked) and 250lbs dynamic (driving). We build the strongest racks on the market, so why do some of the other guys have a higher load rating? Are load ratings are established and tested under the most extreme conditions you can put your vehicle through. The rack has been tested to most trucks' bed side failure. Our rack will handle anything you can throw at it.

The T-Slot option comes with an upright that will work with the t-slot rail found on most popular retractable bed covers. Check out the compatible list of covers to see if yours is on it. If not, reach out to confirm fitment!

There are lots of advantages to a vertical design. Our number 1 goal is to allow the full functionality of as many tonneau covers as possible. This means vertical uprights!

All racks are not built equal! There are a few things that make us stand out to the discerning buyer. TRUKD racks are taller, more versatile, and more durable. We provide more features, and use higher quality coatings, materials, and hardware. TRUKD Racks are designed by seasoned designers and engineers and are tested rigorously to meet our specifications. Learn More.

All v2 rack components are interchangable. Want a tall side and a short side? Done. Want to use a smaller accessory panel on a bigger rack? Done. Want to add multiple crossbars? Done. Want to add a third crossbar? Done. We make it possible for you to build a setup that's perfect for your needs.

Contact us

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Perfect Fit Guarantee

If something doesn't fit, share some pictures and we'll pay for the return shipping in addition to a full refund. We are going to work with you to make sure it's a great fit before it leaves the factory.

Rust Free Guarantee

Our products have the best coatings on the market. Period. See some rust...tell us to get a replacement part...but we know that's not going to happen!