TRUKD 24.5" Bed Rack
- Free Shipping to Continental USA
- Made in Pittsburgh, PA
Total add-ons:
Made in the USA - V2.5 Available Now - Next Batch Shipping Dec. 16-18
Add the most versatile tonneau compatible rack on the market to your truck! Your choice of 4 sizes depending on your needs. These racks are compatible with most tonneau covers! Now in Stainless Steel!
24.5 in
- Great for tents, snowboards, skis, bikes, and long kayaks, canoes, or paddle boards that need to be at roof height
- Adjustable in height in 2 in increments from 6.5" to 24.5"
- Has the ability to add a second crossbar
- Most Tri-Fold tonneau covers will open, we recommend the Extang Solidfold 2.0 or Bakflip MX4 (excluding Toyotas) for full functionality
Build your bed for any adventure by customizing your rack with a variety of compatible accessories to haul your gear!
Need more room for stuff? Check out our accessory panels (Not Included)!
Specs:
Material: 10 Ga. 304 Stainless Steel (Mounts) and Aluminum (Bars and Faceplates)
Bar Width: 3 inches (Standard 8020)
Finish: Textured Black Powder Coat
Load Rating:
Driving Load: 250lbs set / 125 pounds per bar
Parked Load: 1000lbs set / 500 pounds per bar
*For heavy loads, especially off-road, we recommend bed stiffeners to protect your truck.
Tonneau Compatibility
Maximum Width Tonneau Cover: Total bed width +7"
*TRUKD cannot guarantee fitment and functionality with all bed covers. Some may require slight modification for full functionality.
What Comes in the Box
- 4X 18" uprights
- 4X 6" riser bar attachments
- 2X crossbars
- Bed attachment hardware
- 2X Front to back connectors
- 1 Box of hardware and Thread Lock
Why are TRUKD Bed Racks the Best?
- Compatible Accessories for Every Adventure
- Adjustable Height and Length
- 500 Lbs Per Bar Static Load
- Tonneau Compatible, Soft Topper Compatible
- Modular Accessory Panels
- Made in the USA
- Lifetime Guarantee
Perfect Fit Guarantee
If the rack doesn't fit your truck bed right, share some pictures and we'll pay for the return shipping in addition to a full refund. We are going to work with you to make sure it's a great fit before it leaves the factory.
Rust Free Guarantee
Our products are made of the best materials have the best coatings on the market. Period. See some rust...tell us to get a replacement part...but we know that's not going to happen!
*Guarantee protects you against manufacturer's defect, not damage from use. Lifetime guarantee.
Honda Ridgeline
In order to attach our rack to a Honda Ridgeline (2nd Gen Only) you must purchase a utility rail kit similar like this: https://campingrandy.com/products/Unistrut-Bed-Mount-Kit-p397828040
Ford F150/250/350
If you are using our rack on a Ford F series truck and you have a Diamondback Cover, make sure to let us know. We have special extra wide lower brackets to fit that specific combination. This is a 2 piece bracket, which is different from our standard 1 piece.
Trifold Tonneau Covers
Nearly all trifold tonneau covers will work underneath our rack, but only the 24.5" rack is tall enough to allow some of them to fold open. The easiest way to determine if your cover will open is to measure the folds, if your fold is longer than 22.5" from the hinge point it is unlikely to be able to open under our racks.
Tonneaus + Toyotas & Titans
The utility rails on Tacomas, Tundras and Titans are not flush with the bedsides of these vehicles. This limits which tonneau covers are compatible without modification to those that only sit on top of the bedsides like the Extand Solid Fold or Truxedo Truxport or retractable covers with t slots similar to the Retrax Pro XR. If you have a question about your cover, send us a message!
Ford Ranger
On many Ranger builds we've noticed a gap between the bed cap and the metal rail underneath. For a snug fit we recommend adding a 1/8" shim to fill that gap. This has been a truck by truck occurrence, please let us know if you need the shims to be included with you rack.
Truck Caps
Our 24.5" rack is compatible with SoftToppers and Flated Cap Height Toppers. Other Caps that do not overhang the bedsides may be compatible with some additional gaskets such as Fastop or OVS . Traditional ARE or Leer Caps that overhang the bedside are not compatible without significant modification.
Fit Guarantee & Warranty:
We will send you a refund + shipping if our brackets do not fit within 30 days. Just send us pictures and information regarding the incompatible tonneau cover for our records.
All of our products are backed by our 2-year full replacement warranty for any defects. See more information here.
Returns
You have 30 days to try out the product on your truck, if it doesn't work for your needs just ship it back to us for a refund. The product must be complete and in good condition.